- Home
- About Us
- Products
- PET Stretch Blow Moulding (Fully Electricity Type) [8]
- PET Stretch Blow Molding Machine
- PET Stretch Blow Molding Machine
- PET Blow Molding Machine for PET 5 Gallon Bottle
- PET Blow Molding Machine for PET 2 Liter Bottle
- PET Blow Molding Machine for PET 5 Liter Bottle
- PET Blow Molding Machine for PET 5 Liter Bottle
- PET Blow Molding Machine for PET 1.5 Liter Bottle
- PET Blow Molding Machine for PET 600ml Bottle
- PET Stretch Blow Moulding (For Normal Size Bottle) [4]
- PET Stretch Blow Moulding (For Medium Size Bottle) [2]
- PET Stretch Blow Moulding (For Big Jar / Big Volume) [2]
- PET Stretch Blow Moulding (For Small Size Bottle) [3]
- PET Stretch Blow Moulding (For Hot Filling) [2]
- PET Stretch Blow Moulding (Semi-Auto Type) [2]
- PET Injection [2]
- Plastic Projects [5]
- Extrusion Blow Moulding (Single Head, Single / Double Station) [10]
- Blow Molding Machine for 400cc Bottle
- Blow Molding Machine for 2.5 Liter Bottle
- Blow Molding Machine for 4 Liter Bottle
- Blow Molding Machine for 5 Liter Bottle
- Blow Molding Machine for 10 Liter Bottle
- Blow Molding Machine
- Blow Moulding Equipment
- Blow Molding Equipment for 4L Bottle
- Blow Moulding Machine for 5L Bottle
- Extrusion Blow Molding Machine
- Extrusion Blow Moulding (Double Head, Single / Double Station) [10]
- Blow Molding Machine for 400cc Bottle
- Blow Molding Machine for 1 Liter Bottle
- Blow Molding Machine for 1.5 Liter Bottle
- Blow Molding Machine for 2 Liter Bottle
- Blow Molding Machine for 4 Liter Bottle
- Blow Molding Machine
- Blow Molding Machine for 1 Liter Bottle
- Blow Molding Machine for 1.5 Liter Bottle
- Blow Molding Machine for 2 Liter Bottle
- Blow Molding Machine for 4 Liter Bottle
- Extrusion Blow Moulding (Triple Head, Single / Double Station) [8]
- Blow Molding Machine for 400cc Bottle
- Blow Molding Machine for 500cc Bottle
- Bottle Manufacturers - Blow Molding Machine for 750cc Bottle
- Bottle Manufacturers - Blow Molding Machine for 1 Liter Bottle
- Blow Molding Machine for 400cc Bottle
- Blow Molding Machine for 500cc Bottle
- Blow Molding Machine for 750cc Bottle
- Blow Molding Machine for1 Liter Bottle
- Extrusion Blow Moulding (Quadruple Head, Single / Double Station) [10]
- Extrusion Blow Moulding (Eight Head, Single / Double Station) [2]
- Extrusion Blow Moulding (Accumulative Type) [3]
- Extrusion Blow Moulding (Pneumatic Type) [2]
- Auxiliary Equipment [13]
- PET Stretch Blow Moulding (Fully Electricity Type) [8]
- Our Service
- Technology
- News
- FAQ
- Contact Us
Home>
Products>PET Stretch Blow Moulding (Fully Electricity Type)>PET Blow Molding Machine for PET 5 Gallon Bottle
Product
PET Blow Molding Machine for PET 5 Gallon Bottle
PET Blow Molding Machine
Water Bottle
Product ID: CMSQ1
PET Automatic Stretch Blow Molding Machine
For 5L ~ 20L Bottle
CMSQ1 PET blow molding machine for mass production of PET bottles with volumes up to approximately 20L. Ideally suitable for large scale factories and for applications where stringent quality requirements have to be met. Substantial reduction in operating cost is achieved by saving of manpower.
Specifications:
- PET Markets of CMSQ1:
- Mineral Water, Pure Water, Still Drinks.
- Alcoholic Drinks, Soda Drinks, Carbonated Water, Carbonated Drinks, Beer Bottle, Beverage Bottle.
- Juice Drinks, Tea Drinks, Sport Drinks, Coffee Drinks.
- Edible Oil, Sauces, Ketchup.
- Cosmetics, Clean Lotion.
- Liquid Detergent, Shampoo, Body Lotion.
- Pickle Food
- Insecticides Bottle, Pesticides Bottle.
- Container
- Max neck diameter: Ø55 mm
- Max production capacity: 300 ~ 400 pcs/hr
- Max body diameter: Ø300 mm
- Max container height: 500 mm
- Max bottle capacity: 20,000 ml
- No. of cavities: 1
- Heating Oven
- No. of ovens: 4
- No. of infrared heaters in each oven: 16
- Heating load: 96
- Air Pressure
- Low pressure: 7 kg/cm²
- High pressure: 35 kg/cm²
- Cooling Water
- Cooling capacity: 18,000 kcal/h
- Water consumption: 80 l/min
- Water temperature: 10 ~ 12°C
- Pressure: 5 bar
- Installation power: 109 kw
- Total consumption power: 109 kw
- Machine dimension: 3.1 x 2.1 x 3.5 m
- All specifications and designs are subject to change without notice.
Features:
- Production capacity of 400pcs/hr. for 20L one way bottle.
- Fully electric structure makes speed-up, position accurately, stabilizes, and increases efficiency, low noise, without pollution.
- All actions & heating from single panel touch screen control.
- Containuous preform feeding and heating to save energy and be more efficient.
Order Information:
- Minimum Order: 1
- FOB: Taichung Taiwan
Contact Detail
| CEO: | Mr. Fu-Chuan Chiang |
| Contact: | Sales |
| Address: | No.90, Dongcheng Rd., North District Taichung City, Taiwan |
| TEL: | 886-4-22332281 |
| FAX: | 886-4-22306247 |
| Email: |
tuchuan@ms6.hinet.net cm.pet@msa.hinet.net cm-blow@umail.hinet.net |
| URL: | http://www.cm-pet.com |
| ZIP: | 40463 |