Extrusion Blow Molding

In-Mold Labeling Machine

Blow Molding Machine - CM-65DH

In-Mold Labeling Machine

CM-65DH-IML

Containers fabricated using in-mold labeling processes have a higher quality label surface and overall appearance. Typical in-mold labeling (IML) processes involve:
(1) The label is taken into the reach of the mold by means of a handling unit.
(2) The label is transferred and fixed in place (vacuum, static charge) within the cavity range.
(3) The label inserted is rear blow molding inside the mold .
(4) The finished part is removed while a new label is inserted at the same time.

  • Provides superior performance and enhanced efficiency.
  • Labels are impermeable to moisture to minimize chances of peels and cracks.
  • Printed labels are smooth and unblemished.
  • Anti-counterfeit function.
Model CM-65DH-IML
Model Material to be Used   PE/PP
Screw Diameter mm Ø65
L/D Ratio   24/1
Screw Speed Range (PE)/rpm rpm 15-65
Inverter Motor HP 20
Max. Extrusive Capacity/Hour kgs 60
Heating Zone (Barrel) zone 3
Heating Capacity (Barrel) kw 10.8
Die head Heating Zone (Diehead) zone 3
Heating Capacity (Diehead) kw 11.9
Double Mold Center Distance mm 140
Mold Plate Max. Opening Stroke mm 550
Min. Close Stroke mm 172
Mold Clamping Force ton 7.5
Hydraulic System Hydraulic Pump Motor HP 15
Hydraulic Oil Pressure kg/cm2 100
Oil Tank Capacity gallon 85
Product Product Weight (Max.) g 140
Product Dia. (Min./Max.) mm 50-110
Product Capacity (Min./Max.) ml 500-2000
Total Power Consumption kw 52.6
Weight of Machine ton 6
* All Specifications and designs are subject to change without notice.
* All models can be upgraded to hybrid or fully electric type by servo motor control.