CMA(D) Series PET Automatic Stretch Blow Molding Machine
CMA(D) Series - for Bottle Volumes Less Than 600mlCMA - D3 / D4 / D6CMA(D) series PET stretch blow molding machine is a new generation of fully automatic and versatile machines for mass production of PET bottles with volumes up to approximately 200 ~ 600ml. Ideally suitable for large-scale factories and for applications where stringent quality requirements have to be met. Substantial reduction in operating costs is achieved by saving manpower.
01
Preform In-feed and UnscramblerOrientation and delivery of preforms are in an orderly fashion to the machine. Accurate position control of preform is achieved by a pneumatic system.
02
Bottle Discharge SystemBi-axially oriented bottles from the moulds are picked up by robotic arms and placed in an upright position. The in-line conveyor or leaks testing system is optional. equipped.
03
Preform HeatingAccurate temperature control of infrared heaters in various zones of the oven is achieved by electronic control. Rotating preform holding mandrels enables the circumference of preform at each zone to be evenly heated.
04
Touch Screen Control SystemComputer touch screen with the PLC system. All actions of the machine can be seen on the screen. The system is available for many sets of memories. The system diagnoses and displays the problems on the screen to make troubleshooting easier.
| Model | CMA-D3 | CMA-D4 | CMA-D6 | ||
|---|---|---|---|---|---|
| Container | Max. neck diameter | mm | Ø25~Ø33 | ||
| Max. production capacity | pcs/hr | 3000 | 4000 | 6000 | |
| Max. body diameter | mm | 65 | |||
| Max. container height | mm | 250 | |||
| Max. bottle capacity | ml | 600 | |||
| No. of cavity | no. | 3 | 4 | 6 | |
| Mould | Carry pitch | mm | 76.2 | ||
| Mould center distance | mm | 76.2 | |||
| No. of preform mandrels | pcs | 57 | 64 | 102 | |
| Heating oven | No. of even | no. | 2 | 2 | 3~4 |
| No. of infrared heaters in each oven | no. | 6 | |||
| Heating load (max.) | kw | 20 | 20 | 29~38.4 | |
| Air pressure | Low pressure | kg/cm2 | 7 | ||
| High pressure | kg/cm2 | 35 | |||
| Cooling water | Cooling capacity | kcal/h | 18000 | 18000 | 24000 |
| Water consumption | l/min | 80 | |||
| Water temperature | °C | 10~12 | |||
| Pressure | bar | 5 | |||
| Total consumption power | kw | 22 | 22 | 33~43 | |
| Machine dimension | mm | 2.1x1.86x2.2 | 2.7x1.85x2.2 | 4.7x2.22x2.2 | |
| Machine weight | ton | 3 | 3 | 5 | |
* All Specifications and designs are subject to change without notice.
* The production capacity refers to 500ml water bottles.
* CMA Series model can be upgraded to fully electricity type by servo motor control.
Water & Beverage Packaging
Cosmetic
Medical Bottles
