CMS-Q1 5 Gallon Water Bottle Stretch Blow Molding Machine
CMS-Q1 PET Fully Electric Stretch Blow Molding MachineFor 5 Gallon Water BottleIt is a new development machine of 5 gallon PET water tank for medium scale factories. Ideally suitable for for applications where stringent quality requirements have to be met. Inaddition, weare pride to show our clients the technical know-how for processing PET preforms on our automatic machine to produce 5 gallon PET water tank which is cost effective alternative to the traditional 5 gallon PC water tank.
01
Preform In-feed and UnscramblerOrientation and delivery of preforms is in an orderly fashion to the machine. Accurate position control of preform is achieved by pneumatic system.
02
Mould Open-Close SystemUsing servo motor control to optimize the movement such as more accurate positioning, better stabilization, low noise and more efficiency.
03
Mandrel ClawUse pneumatic system transform and servo motor movement to control position of preform before blowing.
04
Stretch Blow SystemServo motor drive enables accurate position. Blowing cinditions is more stable and high efticiency.
| Model | CMSQ1 | ||
|---|---|---|---|
| Container | Max. neck diameter | mm | Ø55 |
| Max. production capacity | pcs/hr | 300~400 | |
| Max. body diameter | mm | 300 | |
| Max. container height | mm | 500 | |
| Max. bottle capacity | ml | 20000 | |
| No. of cavity | no. | 1 | |
| Heating oven | No. of oven | no. | 3 |
| No. of infrared heaters in each | no. | 16 | |
| Heating load (max.) | kw | 96 | |
| Air pressure | Low pressure | kg/cm2 | 7 |
| High pressure | kg/cm2 | 35 | |
| Cooling water | Cooling capacity | kcal/h | 18000 |
| Water consumption | l/min | 80 | |
| Water temperature | °C | 10~12 | |
| Pressure | bar | 5 | |
| Total consumption power | kw | 87.8 | |
| Machine dimension | m | 4.0x2.2x3.5 | |
* All Specifications and designs are subject to change without notice.
Water & Beverage Packaing
